Other Encoders
This page summarizes the latest firmware upgrades available for the product lines listed above. There are several types of firmware upgrades available. Different results are obtained with each type. Please check your currently installed firmware first and contact ATX Networks Digital Video Support if your current firmware is not listed.
The upgrade file is one .tgz file in a compressed zip format. Unzip the file after downloading as the units expect the .tgz file to be presented.
Remote Upgrade
Newer than 4.21-3.9-10.20
- Minor firmware changes
- Suitable when the unit is remotely located
- IP parameters and login credentials are not changed
- Encoder, Output and MUX settings are all reset to factory defaults
Remote Upgrade Instructions pdf
Remote 4.22-3.21-1054 Upgrade.zip
System Recovery / Flash Update
- Fully replaces existing firmware
- Suitable only when the unit is physically available
- Can be used to upgrade any firmware version or when the existing version is unknown
- Used to recover network parameters, login credentials or after misconfiguration
- IP parameters and login passwords are reset to factory default
- Requires full reconfiguration of all channel parameters
DVISm Re-flashing Procedure pdf
Flash_4.22-3.21-10.54.zip
Summary of Available Downloads
Current Firmware Version | Remote Upgrade | Flash Update |
Older than 4.21-3.9-10.20 | N/A | Flash 4.22-3.21-10.54.zip |
Newer than 4.21-3.9-10.20 | Remote 4.22-3.21-1054 Upgrade.zip | Flash 4.22-3.21-10.54.zip |
When available, the remote upgrade option is recommended since parameters do not need to be reconfigured after the upgrade.