QPAIR
| PART NUMBER(1) |
GAIN |
GAIN/SLOPE CONT. |
OUTPUT T.P. |
I/O |
CURRENT(4) |
| BW (MHz) |
Gain(1) (dB) |
Slope (dB) |
Flat. (±dB) |
Gain |
Slope |
RL (dB) |
(mA) |
| (dB) |
| Plug-in |
| QPAIR1000-23GPH/AC |
40-1000 |
23 |
-1/+1.5 |
.75 |
Pad |
EQ |
20 +/- 1 |
16 |
440 |
QPAIR (cont’d)
| PART NUMBER(1) |
DISTORTIONS(2)(3) |
NOISE FIGURE |
AMP TECH(5) |
| Level (dBmV) |
Slope (dB) |
CTB (-dB) |
CSO (-dB) |
| (dB) |
| QPAIR1000-23GPH/AC |
40 |
0 |
81 |
75 |
4 |
GaAs PDH |
NOTES:
(1) Gain specified at highest frequency.
(2) Distortions measured with 50-550 MHz analog CW (6 MHz spacing) and 550-1000 MHz noise at -6 dBc (average power per 6 MHz).
(3) Specified with 0 dB plug-in attenuators and 0 dB plug-in EQs.
(4) DC load current at +24 VDC per module.
(5) GaAs = Gallium Arsenide; PDH = Power-Doubled High-Current
Operating temperature: 0°C to +50°C (+32°F to +122°F)
Humidity: 20-55% (without condensation)
Dimensions: 1.75”H x 19.0”W x 5.0”D (4.45H x 48.26W x 12.7D cm)
Weight: 4.6 lbs (2.1 kg)
Switch
| SWITCHING TIME |
100ms default delay – contact ATX for different delay times |
| ISOLATION |
55 dB from 40-550 MHz; 50 dB from 550-1000 MHz |
| INSERTION LOSS |
2 dB (1 dB on the input and 1 dB on the output) |
| RETURN LOSS |
18 dB (min) |
| RF SENSITIVITY RANGE |
+20 dBmV to +50 dBmV amplifier output monitoring |
| POWER DISSIPATION |
6.3 watts normal mode, 8.5 watts in backup mode |
