DVISn Encoders
Version 2.x (upgrades v2.2 or later)
This is the latest release of firmware for the DVISn (Nano) unit. It may only be used to upgrade installed versions 2.2 or later. If your installed firmware version is 1.x, do not use this upgrade file, use 1.12 update instead. The upgrade consists of one .tgz file compressed in a .zip format. Unzip the file after downloading as the DVISn unit expects the .tgz file to be presented. This .zip file is located below. Upgrade instructions available in pdf format or movie format are also below.
DVISn – 2.8.zip
Firmware Update Video
DVISn Firmware Upgrade Instructions pdf
Note: The firmware version shown in the video may not be the current version. However, the general instructions for uploading firmware are the same those shown in the video.
Version 1.13 DVNANO1IP & DVNANO2IP
This is the latest release of the IP output firmware. It may be used to upgrade DVNANO1IP and DVNANO2IP currently running FW version 1.12. Note: This firmware will not change a RF output DVNANO to an IP output DVNANO. The upgrade consists of one .tgz file compressed in a .zip format. Unzip the file after downloading as the DVISn unit expects the .tgz file to be presented. This .zip file is located below. Upgrade instructions available in pdf format or movie format are also below.
DVISn – 1.13.zip
Firmware Update Video
DVISn Firmware Upgrade Instructions pdf
Note: The firmware version shown in the video may not be the current version. However, the general instructions for uploading firmware are the same those shown in the video.
Version 1.12 (upgrades v1.8 or later)
This is the latest release of firmware for the DVISn (Nano) unit. It may only be used to upgrade installed versions 1.8 or later. If your installed firmware version is 1.7 or earlier, do not use this upgrade file; contact ATX Networks Technical Support. The upgrade consists of one .tgz file compressed in a .zip format. Unzip the file after downloading as the DVISn unit expects the .tgz file to be presented. This .zip file is located below. Upgrade instructions available in pdf format or movie format are also below.
DVISn – 1.12.zip
Firmware Update Video
DVISn Firmware Upgrade Instructions pdf
Summary of Available Downloads
DVISn Models | Required FW for Upgrade | Upgrade File |
DVNANO1 & DVNANO2 |
1.8 – 1.12 (Rev 1) | DVISn – 1.12.zip |
2.2 – 2.x (Rev 2) | DVISn – 2.8.zip | |
DVNANO1IP & DVNANO2IP |
1.12 (Rev 1) | DVISn – 1.13.zip |